Corrugated Die Cutting And Creasing Machine Automatic Pizza Box Making Machine
I. What is Rotary diecutter ?
A: Rotary diecutter is used for corrugated cardboard die-cutting after printing. Different products need different sizes, shapes of cartons. For the special shape cartons like pizza box, fruit packages may need holes or handle or bottom locking and different sizes, these requirements will need the rotary diecutting machine to do.
Make wooden die as per customer cartons requirements, then install on the die cutting roller to cut the sheets into needed shapes, and crease lines at the same time, after that, can fold the sheets into cartons for packing.
II. Machine configuration
1. The material of diecutting roller is centrifugal casting, thickness is 35mm, balancing correction, with hard chrome plating.
2. High quality steel wallboard, thickness is 50mm, processed in huge machining center.
3. The soft roller equipped with auto grinding device to improve the repetition rate of anvil blanket, can grind 3~4times once.
4. Auto linear speed compensation to assure the diecutting size of each batch is the same.
5. Imported PU anvil blanket, easy to install, can die cut 12million times.
6. Mechanical soft roller can move left-right in the range of 40mm, the blanket is worn averagely.
7. The automatic separation device of diecutting roller by air cylinder, can decrease the wearing of blanket.
Auto feeder part
1. Adopt the advanced lead edge auto feeder, high precision feeding, high speed, long lifetime, speed can be 10000pcs/h, precision is ±0.5mm.
2. The blower volume can be adjusted randomly.
3. The phase is controlled by micro computer, can be adjusted in degree 360 randomly, fast and exact.
4. Front baffle is adjusted manually, side baffle is adjusted computerized.
5. Has the groove on paper guiding roller, to avoid pressing the paper seriously, increase the feeding accuracy.
III. Technical parameters
|Max. sheet feeding size
|Max. die cutting size
|Min. die cutting size
|Above rubber roller diameter
|Down die-cutting roller diameter
|Suitable board thickness